MS5849 absolute pressure sensor The MS5849 is a digital OEM sensor* that measures the absolute pressure* with high 24bit resolution. It is compensated and provides the measured values as digital output signals via an I²C or SPI interface. The reflowable sensors are designed for the pressure range of 0.3 – 30 bar [...]
AMS 5935 pressure sensor with I2C / SPI output AMS 5915 in different variants The digital 18 bit board-mount pressure sensors in the AMS 5935 series are designed for high precision measurements in low and ultra-low pressure ranges of +/- 125 Pascal. They combine very high measurement accuracy with extremely low [...]
SM97A – backside absolute pressure sensor die The SM97A is a silicon micro-machined, piezoresistive pressure-sensing chip. It replaces the SM98A offering a better sensitivity and very low long-term drift. The SM97A is designed for harsh media where absolute pressure needs to be accurately measured. In contrast to traditional pressure-sensing chips the media [...]
SM5108 – absolute pressure sensor die The SM5108E is an all silicon micro-machined, piezoresistive pressure sensing chip. The die is extremely small (0.69 mm x 0.69 mm) and has been optimized to provide the highest possible accuracy for a die of this size. Performance is achieved through careful resistor placement and mechanical [...]
AD-101 – Ultrasonic bubble detector for fluid control The compact AD-101 Air Bubble Detector (ABD) is used for non-invasive continuous monitoring of fluid for air bubble detection. Detecting a break in the flow of liquids is critical in applications such as infusion pumps, hemodialysis and blood flow monitoring. Using ultrasonic technology, the [...]
LME - digital analog sensor with amplified output The LME differential low pressure sensors are based on thermal flow measurement of gas through a micro-flow channel integrated within the sensor chip. The innovative LME technology features superior sensitivity especially for ultra low pressures. The extremely low gas flow through the sensor ensures [...]
LMI - digital low pressure sensor with amplified output The digital LMI differential pressure sensors with I²C bus and 3 V supply are based on thermal micro-flow measurement within the silicon sensor chip and offer measuring ranges from 25 Pa (0.1 inH2O) Full Scale. Due to their excellent sensitivity, accuracy, offset long [...]
1620 - Inexpensive blood pressure sensor for single use The 1620 is a calibrated relative pressure sensor for the clinically relevant pressure range of -50 to 300 mmHg. A biocompatible gel protects the pressure cell from the medium to be measured. For hygienic reasons, the sensor is designed as an easily replaceable [...]
Ceramic wet-wet pressure sensor ME800 The ME800 is a very robust differential OEM sensor* for wet-wet applications. The membrane can flex in both directions, thus being deformed by the combination of the two pressure values. The ME820 differential sensor is a so-called wet-wet sensor as it allows having liquids on both sides of [...]
AMS 5915 pressure sensor with digital output AMS 5915 differential pressure sensor without tubes for pressure connection Block diagram AMS 5915 AMS 5915 pressure sensors are a series of high-precision OEM sensors* with a digital I²C-interface with multiple pressure ranges from 0-2,5 mbar to 0-16 bar and customizable pressure ports. AMS [...]
AMS 5105 pressure sensor with voltage output and switching outputs, shown as absolute pressure version Block diagram AMS 5105 The AMS 5105 series of OEM sensors are fully signal conditioned, amplified, temperature compensated sensors in a dual in-line package (DIP) configuration with a 0,5 -4,5 V /2,5±2V analog output und and two independent, [...]
AMS 5812 pressure sensor with analog and digital output Block diagram AMS 5812 The AMS 5812 series of OEM sensors are fully signal conditioned, amplified, temperature compensated sensor in a dual in-line package (DIP) configuration with a 0,5 -4,5V/2,5 ±2V analog output and an I²C- interface. The AMS 5812 are calibrated and compensated in the [...]