M5601 wireless media compatible pressure transmitter
The M5601 are wireless pressure and temperature transmitters, explosion-proof ATEX and CSA HazLoc (IECEx) certified that enables them to be used in hazardous environments.
These pressure transducers transmit the calibrated and temperature compensated signals via Bluetooth communication protocol (Bluetooth 4.2), enabling a wireless process control by that. The pressure transmitters are powered by a CR2032/CR2050W button cell and can be read out using an app or PC software for Windows® XP/7 and higher.
They measure the gage or absolute pressure independently of the media. The latter device is configured as a sealed gage* relative to a trapped volume, whereas the gage and compound version outputs the measurement relative to atmospheric pressure – the compound version also with negative pressure. All versions are available with various pressure connectors.
Wireless M560X series pressure transmitters* are recommended for their robustness, good long-term stability and numerous protective functions for demanding industrial applications. The medium only comes into contact with 17-4 PH stainless steel (1.4542); no internal O-ring is used! This allows all oils, including gasoline and other fuels, to be measured. They can even be used in contaminated water, steam and slightly corrosive liquids. The original M5600 differs by a lower pressure range, starting at 3.5 bar and no particular ATEX/HazLoc protection.
Parallel to the M5601 AMSYS GmbH & Co. KG also supplies a pressure transmitter for smaller pressure ranges of up to 350 mbar or 35 bar – the U5601. Both are water resistant to IP65 and exceed the latest CE and FCC guidelines for heavy industry. They are protected against overvoltage and reverse polarity and ATEX/HazLoc certified.
Variants of the M5601
Pressure ranges M5601: 0-1’000, 0-3’000, 0-5’000, 0-10’000, 0-15’000 psi (also available in bar up to 1’000 bar)
Pressure ranges U5601: 0-5, 0-15, 0-30, 0-50, 0-100, 0-200, 0-300,0-500 psi (also available in bar up to 35 bar)
Link to ATEX/HazLoc-certified U5601 and pressure transmitter M5600
Link to the pressure converter
* Sealed gage is a kind of absolute pressure. It is used in particular for measuring the absolute pressure, at high pressures. However, unlike absolute pressure sensors, the trapped volume was not evacuated.
Features
- Pressure ranges: 0-1.000 psi up to 0-15.000 psi (0-70 bar up to 0-1.000 bar)
- Relative and absolute (sealed gage)
- ATEX and CSA HazLoc (IECEx) certification
- Temperature range: -10°C to +60°C
- Total error band < ± 1.00 % FS
- Long-term stability ± 0.25 % FS
- Battery life: 1 to 5 years, CR2050 or CR2050W
- Reverse polarity protection and short circuit protection
- Compact design, stainless steel construction
- Variety of mechanical pressure connections
- CE and FCC compliant
- IP65 protected
- RoHS and REACH compliant
Applications
- controlling pressure in areas that are difficult to access
- Industrial Process Control and Monitoring
- Advanced HVAC Systems
- explosion exposed applications
- Refrigeration Systems
- Automotive Test Stands
- Mobile work tools
- Off-Road Vehicles
- Hydraulic/Pneumatic Systems
- Agriculture Equipment
- Energy generation and energy management
Downloads
- Data sheet pressure transmitter M5601
- U5600 / M5600 installation manual (also applies to M5601)
- U5600 / M5600 software manual (also applies to M5601)
- Application note aan519: U5200 – Media compatible pressure transmitters for hydraulic applications (also applies to M5601)
For information on prices and delivery times or if you have any technical questions, please contact info@amsys-sensor.com.