Nano – Pressure and vacuum switch with IO-Link

Nano - pressure and vacuum switch The Nano pressure switch can measure filtered, dry or oiled air and non-corrosive gases. Two independently adjustable electrical switching outputs for up to 250 mA each are offered. In addition to the classic programming on site by push-buttons and the easy-to-read LED display, this transmitter qualified [...]

U5601 – wireless ATEX/CSA HazLoc (IECEx) pressure transmitter up to 35 bar

U5601 wireless media compatibe pressure transmitter The U5601 are wireless pressure and temperature transmitters with iOS, Android and Windows XP / 7+ compatibility for absolute and gage pressure. This sensor with Bluetooth communication can process pressures of up to 35 bar. What’s special about this sensor is its explosion-proof ATEX and CSA [...]

M5600 – BLE mediaresistant pressure transmitter up to 15K psi

M5600 wireless media compatible pressure transmitter The M5600 are wireless pressure and temperature transmitters with iOS, Android and Windows XP / 7+ compatibility. These pressure transducers transmit the calibrated and temperature compensated signals via Bluetooth communication protocol (Bluetooth 4.2), enabling a wireless process control by that. The transmitters are powered by a [...]

SM5108 – absolute pressure sensor die

SM5108 – absolute pressure sensor die The SM5108E is an all silicon micro-machined, piezoresistive pressure sensing chip. The die is extremely small (0.69 mm x 0.69 mm) and has been optimized to provide the highest possible accuracy for a die of this size. Performance is achieved through careful resistor placement and mechanical [...]

SM30F – medium pressure sensor die 150 psi

SM30F – medium pressure sensor die The SM30F is a silicon micro-machined, piezoresistive pressure sensing die. This pressure die is available for full-scale ranges from 0-5 to 150 psi. Both open-bridge and closed-bridge versions are available. This pressure chip has a cost-saving tiny size and good temperature stability. It is ideal for [...]

Pico – vacuum and pressure switch with IO-Link

Pico - vacuum pressure switch with IO-Link The Pico pressure switch offers two independently adjustable electrical switching outputs for up to 250 mA each. In addition to the classic programming on site by push-buttons and the easy to read LED display, this transmitter qualified for industry 4.0 offers an IO-Link interface for central [...]

ME800 – ceramic wet-wet differential pressure sensor

Ceramic wet-wet pressure sensor ME800 The ME800 is a very robust differential OEM sensor* for wet-wet applications. The membrane can flex in both directions, thus being deformed by the combination of the two pressure values. The ME820 differential sensor is a so-called wet-wet sensor as it allows having liquids on both sides of [...]

AMS 5915 – digital pressure sensor 2,5 mbar – 16 bar

AMS 5915 pressure sensor with digital output AMS 5915 differential pressure sensor without tubes for pressure connection Block diagram AMS 5915 AMS 5915 pressure sensors are a series of high-precision OEM sensors* with a digital I²C-interface with multiple pressure ranges from 0-2,5 mbar to 0-16 bar and customizable pressure ports. AMS [...]

MS5803 – series digital absolute pressure sensors up to 1 / 2 / 5 / 14 / 30 bar

Absolute pressure sensor MS5803 The MS5803-xxBA is a new generation of high resolution sensors with SPI & I²C interface. The sensor module includes a high linearity pressure sensor with an ultra low power 24 bit ADC with internal factory calibrated coefficients. It provides precise digital 24 bit pressure and temperature values and different operation modes that allow [...]

AMS 5105 – pressure sensor with switching output

AMS 5105 pressure sensor with voltage output and switching outputs, shown as absolute pressure version Block diagram AMS 5105 The AMS 5105 series of OEM sensors are fully signal conditioned, amplified, temperature compensated sensors in a dual in-line package (DIP) configuration with a 0,5 -4,5 V /2,5±2V analog output und and two independent, [...]

AMS 5812 – pressure sensor with analog & digital output

AMS 5812 pressure sensor with analog and digital output Block diagram AMS 5812 The AMS 5812 series of OEM sensors are fully signal conditioned, amplified, temperature compensated sensor in a dual in-line package (DIP) configuration with a 0,5 -4,5V/2,5 ±2V analog output and an I²C- interface. The AMS 5812 are calibrated and compensated in the [...]

U5600 – BLE mediaresistant pressure transmitter up to 35 bar

U5600 wireless media compatible pressure transmitter The U5600 are wireless pressure and temperature transmitters with iOS, Android and Windows XP / 7+ compatibility. These pressure transducers transmit the calibrated and temperature compensated signals via Bluetooth communication protocol (Bluetooth 4.2), enabling a wireless process control by that. The transmitters are powered by a [...]

Go to Top