Nano – Pressure and vacuum switch with IO-Link

Nano - pressure and vacuum switch The Nano pressure switch can measure filtered, dry or oiled air and non-corrosive gases. Two independently adjustable electrical switching outputs for up to 250 mA each are offered. In addition to the classic programming on site by push-buttons and the easy-to-read LED display, this transmitter qualified [...]

ME501 – ceramic pressure cell with high sensitivity and additional coating

ME501 ceramic pressure cell The flush-mounted ME501 pressure measuring cells for pressure ranges between 0 and 50 bar and the ME505 for the higher pressure ranges for absolute and relative pressures between 0.5 and 800 bar operate according to the piezoresistive principle. The sensor element is made of ceramic aluminum oxide Al2O. [...]

ME910 – Miniature ceramic pressure cell with only 9mm diameter

Miniatur ceramic pressure cell ME910 Front and back view ME910 monolithic pressure cells for gauge pressures up to 100 bar, work following the piezoresistive principle. This sensing element is made of Ceramic Alumina Al2O. This material is naturally mechanically resilient and has an excellent chemical resistance, suitable for harsh environments.The measuring cell has [...]

U5601 – wireless ATEX/CSA HazLoc (IECEx) pressure transmitter up to 35 bar

U5601 wireless media compatibe pressure transmitter The U5601 are wireless pressure and temperature transmitters with iOS, Android and Windows XP / 7+ compatibility for absolute and gage pressure. This sensor with Bluetooth communication can process pressures of up to 35 bar. What’s special about this sensor is its explosion-proof ATEX and CSA [...]

M5600 – BLE mediaresistant pressure transmitter up to 15K psi

M5600 wireless media compatible pressure transmitter The M5600 are wireless pressure and temperature transmitters with iOS, Android and Windows XP / 7+ compatibility. These pressure transducers transmit the calibrated and temperature compensated signals via Bluetooth communication protocol (Bluetooth 4.2), enabling a wireless process control by that. The transmitters are powered by a [...]

SM97A – harsh media backside absolute pressure sensor die

SM97A – backside absolute pressure sensor die The SM97A is a silicon micro-machined, piezoresistive pressure-sensing chip. It replaces the SM98A offering a better sensitivity and very low long-term drift. The SM97A is designed for harsh media where absolute pressure needs to be accurately measured. In contrast to traditional pressure-sensing chips the media [...]

SM5108 – absolute pressure sensor die

SM5108 – absolute pressure sensor die The SM5108E is an all silicon micro-machined, piezoresistive pressure sensing chip. The die is extremely small (0.69 mm x 0.69 mm) and has been optimized to provide the highest possible accuracy for a die of this size. Performance is achieved through careful resistor placement and mechanical [...]

SM30F – medium pressure sensor die 150 psi

SM30F – medium pressure sensor die The SM30F is a silicon micro-machined, piezoresistive pressure sensing die. This pressure die is available for full-scale ranges from 0-5 to 150 psi. Both open-bridge and closed-bridge versions are available. This pressure chip has a cost-saving tiny size and good temperature stability. It is ideal for [...]

P.Touch – Pressure Switch with Touchscreen and IO-link

P.Touch - mediaresistant pressure switch up to 600 bar with touchscreen and IO-Link P.Touch are pressure switches for fluids and gases under pressures up to 600 bar. The transmitters, which can be operated intuitively via touchscreen, offer two independently adjustable electrical switching outputs, both of which can be loaded up to 200 [...]

Pico – vacuum and pressure switch with IO-Link

Pico - vacuum pressure switch with IO-Link The Pico pressure switch offers two independently adjustable electrical switching outputs for up to 250 mA each. In addition to the classic programming on site by push-buttons and the easy to read LED display, this transmitter qualified for industry 4.0 offers an IO-Link interface for central [...]

ME800 – ceramic wet-wet differential pressure sensor

Ceramic wet-wet pressure sensor ME800 The ME800 is a very robust differential OEM sensor* for wet-wet applications. The membrane can flex in both directions, thus being deformed by the combination of the two pressure values. The ME820 differential sensor is a so-called wet-wet sensor as it allows having liquids on both sides of [...]

AMS 5915 – digital pressure sensor 2,5 mbar – 16 bar

AMS 5915 pressure sensor with digital output AMS 5915 differential pressure sensor without tubes for pressure connection Block diagram AMS 5915 AMS 5915 pressure sensors are a series of high-precision OEM sensors* with a digital I²C-interface with multiple pressure ranges from 0-2,5 mbar to 0-16 bar and customizable pressure ports. AMS [...]

Go to Top